REDARC Battery Master Isolation Switch - 4PN - Micks Gone Bush
REDARC Battery Master Isolation Switch - 4PN $1,496.00

Overview The REDARC Battery Master Isolation Switch is designed to isolate both battery circuits, with positive and negative isolation. The Battery Master Isolation Switch safely isolates vehicle batteries and ensures reliable performance when the vehicle is operating. The REDARC BMIS will also ensure that no loads are drawn from the vehicle whilst not in use, thereby reducing flat battery faults. The Battery Master Isolation Switch also features an ISO 26262 rated dual redundancy system to avoid false triggering. The Battery Master Isolator Switch by REDARC, fitted as OE at Kenworth is now available for heavy vehicle applications. The REDARC BMIS4PNKIT also includes a BMIS-CK connector kit as standard if the BMIS is not installed on a Kenworth.  For retrofitting installations, REDARC recommends the purchase of the BMIS-AP adaptor plate. Both the BM1S-CK connector kit and the BM1S-AP can be purchased as separate stand-alone accessories through your local distributor. Benefits          Compatible with existing roll-over sensors          Reviewed by independent heavy vehicle experts           Durable, UV resistant housing, resistant to rocks and water          Easy to install from new or as a retrofit Features          Rated IP66, IP67 & IP69K          Dual redundancy feature to avoid false triggering          Continuous self-checking function          In-built lockout capability          In-built diagnoses from external looms and remote actuating devices Specifications Connection AU/NZ Power Socket Input (Operating) Voltage 9V to 32V (12V or 24V systems) Current Rating (Continuous 20°C) 400A per pole Current Rating (20s,20°C) 3500A per pole Waterproof IP rating IP66, IP67 & IP69K Length (mm) 218 Width (mm) 158 Height (mm) 188 Weight (kg) 3.5

Sold out
REDARC BMIS Connector Kit - Micks Gone Bush
REDARC BMIS Connector Kit $160.77

Overview Designed for installation on a heavy vehicle where a factory harness is not available, the BMIS Connector Kit is a high-quality Deutsch male connector kit containing the required housing and terminals to terminate a loom for connection to the REDARC Battery Master Isolation Switch. This kit is supplied as standard with both the REDARC BMIS4PPKIT and BMIS4PNKIT. To purchase the BMIS Connector Kit as a standalone item contact your local distributor Kit contents: Connector HDP20 Backshell straight Terminal 16-20AWG Terminal 14AWG Sealing plugs HDP20 Contact removal tool Specifications Warranty 2 Years

REDARC BMIS Adaptor Plate - Micks Gone Bush
REDARC BMIS Adaptor Plate $89.99

Overview Designed to retrofit the REDARC Battery Master Isolation Switch to existing installations of other brand switches, the BMIS Adaptor Plate is a high quality mounting plate and fastener set suitable for heavy vehicle applications. Corrosion resistant and tolerant to harsh vibrations, the Battery Master Isolation Switch Adaptor Plate makes retrofitment easy and reliable. Kit contents REDARC BMIS Adaptor Plate M8 Nyloc nuts M8 Washers Specifications Warranty 2 Years

REDARC Roll Over Sensor - Micks Gone Bush
REDARC Roll Over Sensor $1,022.00

Overview The Roll Over Sensor (ROS) triggers a battery isolation in the event of a vehicle rollover by signalling the isolation switch to disconnect power to the trucks system. It enables trucks to meet the legal requirement of roll-over sensing (AS2809:2008) and represents a significant improvement over existing rollover switches in the market. The Roll Over Sensor has been designed for high reliability undergoing thorough environmental and lifetime testing. It is compatible with most common battery master isolation switches and will provide enhanced safety when used with REDARC’s Battery Master Isolation Switch (BMIS).   Features Easy periodic test by pin-removal and tilt mechanism Suitable for 12V or 24V systems Uses dual accelerometers for automotive safety applications, giving high accuracy, reliability and ability to detect fault conditions  Resilient to truck electrical environments Immune to vibration, bump, shock, turning or electrical transients  Built for high reliability using automotive grade parts, and redundant sensors and controllers Custom industrial design housing Fault detection and indication LED on the unit and via an optional dash-mounted lamp Specifications Input (Operating) Voltage 9V to 32V (12V or 24V systems) Current draw (into VIN+) 16mA (typical) Switching Point 45° - 64° (55° typical) Waterproof IP rating IP66, IP67 & IP69K Length (mm) 150 Width (mm) 122 Height (mm) 65 Weight (kg) 0.7 Warranty 2 Years

REDARC Battery Master Isolation Switch - 4PP - Micks Gone Bush
REDARC Battery Master Isolation Switch - 4PP $1,496.00

Overview Typically used on high current 12V heavy vehicles, the REDARC Battery Master Isolator Switch is used in heavy vehicles with dual start cables. The Battery Master Isolator Switch is designed to safely isolate vehicle batteries and ensure reliable performance when the vehicle is operating. The REDARC Battery Master Isolator Switch will also ensure that no loads are drawn from the vehicle whilst not in use, thereby reducing flat battery faults. The Battery Master Isolator Switch meets and exceeds the requirements of large diesel engines in 12 and 24 volt systems and features an ISO 26262 rated dual redundancy system to avoid false triggering. The Battery Master Isolator Switch by REDARC, fitted as OE at Kenworth is now available for heavy vehicle applications.The REDARC BMIS4PPKIT also includes a BMIS-CK connector kit as standard if the BMIS is not installed on a Kenworth.  For retrofitting installations, REDARC recommends the purchase of the BMIS-AP adaptor plate. Both the BM1S-CK connector kit and the BM1S-AP can be purchased as separate stand-alone accessories through your local distributor.   Benefits          Compatible with existing roll-over sensors          Reviewed by independent heavy vehicle experts          Durable, UV resistant housing, resistant to rocks and water          Easy to install from new or as a retrofit   Features          Rated IP66, IP67 & IP69K          Dual redundancy feature to avoid false triggering          Continuous self-checking function          In-built lockout capability          In-built diagnoses from external looms and remote actuating devices Specifications  

5