REDARC Dual Input 50A In-vehicle DC Battery Charger - Micks Gone Bush
REDARC Dual Input 50A In-vehicle DC Battery Charger $809.00

Overview     BCDC1250D Manual The REDARC BCDC1250D In-vehicle Battery Charger is a 12V 50A In-vehicle DC to DC battery charger. It is the latest variant of the award-winning BCDC Dual range and features REDARC’s Smart Start technology. Styled with a red line running down its back tells you there’s something different about this dual battery charger. A 50-amp charging output makes it the most powerful in REDARC’s BCDC range.  The BCDC1250D has been developed to provide a higher current output, it features an additional charging stage known as SoftStart which has been engineered to handle more demanding applications. Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1250D will charge from both solar and the alternator simultaneously. And, with built-in 'Green Power Priority' it will select solar charging first, meaning less load on the alternator. Suitable for 12 or 24-volt vehicle systems, the unit will also work with either standard or variable/smart alternators. It is compatible with all common types of batteries used in automotive and recreational vehicles such as AGM, Gel, standard lead acid, Calcium and LiFeP04. As a guide, the BCDC1250D is used for battery bank sizes over 200AH. For smaller batteries of 75-200AH REDARC recommends the BCDC1225D.    Proven and Tested The award-winning technology in the BCDC has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%. Built in Australia and tested for our unique conditions, the DC to DC battery charger will work in the extreme heat of the Simpson Desert, up to 80°C and can handle deep water crossings at Cape York – water, dust and vibration are no match for this charger. If you’re heading out into the bush and want to get there and back again safely – you can trust REDARC.     Features           50amp output makes it the most powerful in REDARC's BCDC range           Separate DC and solar charging inputs           Maximises the performance and life of your auxiliary battery           Simultaneous DC and solar charging with Green Power Priority           Suits 12V/24V standard and variable voltage/smart alternators           Suitable for AGM, GEL, standard lead acid, calcium and LiFeP04 batteries Specifications Input (Operating) Voltage 9 - 32VDC Output System Voltage 12VDC Maximum Charging Voltage 15.3V Output Current Rating (Cont.) 50A Input Fuse Rating 60A Output Fuse Rating 60A Standby Current Draw <100mA Output Power 750W Width (mm) 120 Height (mm) 37 Length (mm) 165 Weight (kg) 1 Warranty 2 Years Videos

12 Volt Dual Input 40A In-vehicle DC Battery Charger - Micks Gone Bush
12 Volt Dual Input 40A In-vehicle DC Battery Charger $708.00

OVERVIEW     BCDC1240D Product Manual Dual Input 40A In-vehicle DC Battery Charger is the next generation in REDARC's DC to DC charging technology, with additional features that make it the most advanced dual battery charger on the market. Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1240D will charge from both solar and the alternator simultaneously. With built-in 'Green Power Priority' it will select solar charging first, meaning less load on the alternator. Suitable for 12 or 24-volt vehicle systems, the unit will also work with either standard or variable/smart alternators. The BCDC1240D also comes with patented charging profiles, including a lithium charging profile. The 'Dual' input range will continue to charge all other types of batteries including AGM, GEL, standard lead acid and calcium.  As a guide, the BCDC1240D is used for battery bank sizes over 200AH. For smaller batteries of 75-200AH REDARC recommends the BCDC1225D.    Proven and Tested The award-winning technology in the BCDC has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%. Built in Australia and tested for our unique conditions, the DC to DC battery charger will work in the extreme heat of the Simpson Desert, up to 80°C and can handle deep water crossings at Cape York – water, dust and vibration are no match for this charger. If you’re heading out into the bush and want to get there and back again safely – you can trust REDARC.   Separate DC and solar charging inputs Maximises the performance and life of your auxiliary battery Simultaneous DC and solar charging with Green Power Priority Suits 12V/24V standard and variable voltage/smart alternators Suitable for AGM, GEL, standard lead acid, calcium and LiFePO4 batteries   Mounting Brackets   In addition to the use of quality fuse kits, REDARC offer a range of vehicle-specific mounting brackets for our BCDC DC-DC Charger range. The 304 stainless steel bracket allows installation into the front of the vehicle for cooler airflow, ensuring optimal performance. They have been designed to fit existing mounting points in the vehicle. SPECIFICATIONS Input (Operating) Voltage 9 - 32VDC Output System Voltage 12VDC Maximum Charging Voltage 15.3V Output Current Rating (Cont.) 40A Type Approval E-Mark Input Fuse Rating 60A Output Fuse Rating 60A Warranty 2 Years Standby Current Draw <100mA Output Power 600W Width (mm) 120 Height (mm) 37 Length (mm) 165 Weight (kg) 1   VIDEOS

REDARC Dual Input 25A In-vehicle DC Battery Charger - Micks Gone Bush
REDARC Dual Input 25A In-vehicle DC Battery Charger $610.00

Overview     BCDC Dual Manual The REDARC BCDC1225D In-vehicle Battery Charger is the next generation in REDARC's DC to DC charging technology, with additional features that make it the most advanced dual battery charger on the market. Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1225D will charge from both solar and the alternator simultaneously. And, with built-in 'Green Power Priority' it will select solar charging first, meaning less load on the alternator. Suitable for 12 or 24-volt vehicle systems, the unit will also work with either standard or variable/smart alternators. The BCDC1225D features the same patented charging profiles as it’s predecessor along with a new lithium charging profile making the unit suitable for charging AGM, Gel, Standard Lead Acid, Calcium and LiFePO4 batteries. For most applications, the BCDC1225D is suitable for battery bank sizes of 75-200AH. For higher capacity needs of over 200AH, REDARC recommends the BCDC1240D.  Proven and Tested The award-winning technology in the BCDC has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%. Built in Australia and tested for our unique conditions, the DC to DC battery charger will work in the extreme heat of the Simpson Desert, up to 80°C and can handle deep water crossings at Cape York – water, dust and vibration are no match for this charger. If you’re heading out into the bush and want to get there and back again safely – you can trust REDARC.     Features Separate DC and solar charging inputs Maximises the performance and life of your auxiliary battery Simultaneous DC and solar charging with Green Power Priority Suits 12V/24V standard and variable voltage/smart alternators Suitable for AGM, GEL, standard lead acid, calcium and LiFePO4 batteries Specifications Input (Operating) Voltage 9 - 32VDC Output System Voltage 12VDC Maximum Charging Voltage 15.3V Output Current Rating (Cont.) 25A Input Fuse Rating 40A Output Fuse Rating 40A Type Approval E-Mark Warranty 2 Years Standby Current Draw <100mA Output Power 375W Width (mm) 120 Height (mm) 37 Length (mm) 165 Weight (kg) 1 Videos

-5% sale
REDARC The Manager30 S2 - Micks Gone Bush
REDARC The Manager30 S2 $1,964.53

Overview     BMS1230S3 Manual The Manager30 is a complete battery management system for charging auxiliary batteries used in recreational automotive and marine applications. The dual battery system incorporates AC, DC and solar inputs to achieve the best charge for an auxiliary battery. Developed with ease of installation in mind, The Manager30 is compatible with all vehicles and alternator systems including variable voltage alternators. Whether you’re charging Lead Acid, Gel, Calcium, AGM or Lithium Iron Phosphate batteries, The Manager30 represents a complete DC to DC charging and maintenance solution. If you’re charging one auxiliary battery or more, The Manager30 will ensure they’re always fully charged, providing peace of mind when battery charge provides the power source for the comforts of home whilst travelling around Australia. The Manager30 operates like 6 separate products, it charges an auxiliary battery from the vehicle while on the move, it’s a 240 volt charger, a solar regulator, a battery isolator, a load disconnect controller, all with a remote battery monitor, making it market leading.   Charging lithium batteries Lithium batteries have improved storage capacity relative to size and weight. They do however require specific charging conditions in order to operate correctly and the battery itself must have an in-built cell management system. REDARC have designed a charging profile within The Manager30 to complement these in-built systems.   Green power priority The Manager30 is designed to charge an auxiliary battery from multiple sources simultaneously. If 12 volt solar power is available, solar power will be used before topping up the output charging current from another source mains (if available) or DC vehicle power when on the move.   MPPT solar regulator The built-in Maximum Power Point Tracking (MPPT) solar regulator allows The Manager30 to deliver the maximum amount of power from portable solar panels, even during low light conditions.   Remote monitor Designed to show you auxiliary battery information and charge status. You can customise how your battery is charged and monitor where the charge is coming from. A user-friendly, graphical display monitor lets you know what’s going on, keeping you in control at all times.   Features Multi Stage AC-DC Battery Charger Multi Stage DC to DC Charger Maximum Power Point Tracking Solar Regulator Battery Monitor Dual Battery Isolator Load Disconnect Controller Super quiet operation Charges AGM, Gel, Calcium content, VRLA, Standard Lead Acid and LiFePO4 batteries Tested to mains power safety standards in Australia Specifications Output System Voltage 12VDC Maximum Charging Voltage 16.0V* (*Calcium setting in storage mode) Output Current Rating (Cont.) 30A Output Power 520W Input Fuse Rating 40A Output Fuse Rating 40A Warranty 2 Years Protection Short Circuit, Surge, Reverse Polarity, Overload Input (Operating) Voltage 240VAC / 9 - 32VDC Length (mm) 445 Width (mm) 185 Height (mm) 79 Weight (kg) 5.5 AC Mains Plug Type AU, NZ, EU Type Approval CE Videos

REDARC Manager30 S3 - Micks Gone Bush
REDARC Manager30 S3 $2,064.00

OVERVIEW     BMS1230S2 Manual Next generation Manager30 S3 model is the complete battery management system for charging auxiliary batteries used in 4wd , camper recreational automotive and marine applications. The dual battery system incorporates AC, DC and solar inputs to achieve the best charge for an auxiliary battery. Has been Developed with ease of installation in mind, The Manager30 is compatible with all vehicles and alternator systems including variable voltage alternators. Whether you’re charging Lead Acid, Gel, Calcium, AGM or Lithium Iron Phosphate batteries, The Manager30 represents a complete DC to DC charging and maintenance solution. If you’re charging one auxiliary battery or more, The Manager30 will ensure they’re always fully charged, providing peace of mind when battery charge provides the power source for the comforts of home whilst travelling around Australia. The Manager30 operates like 6 separate products, it charges an auxiliary battery from the vehicle while on the move, it’s a 240 volt charger, a solar regulator, a battery isolator, a load disconnect controller, all with a remote battery monitor, making it market leading.   Charging lithium batteries Lithium batteries have improved storage capacity relative to size and weight. They do however require specific charging conditions in order to operate correctly and the battery itself must have an in-built cell management system. REDARC have designed a charging profile within The Manager30 to complement these in-built systems.   Green power priority The Manager30 is designed to charge an auxiliary battery from multiple sources simultaneously. If 12 volt solar power is available, solar power will be used before topping up the output charging current from another source mains (if available) or DC vehicle power when on the move.   MPPT solar regulator The built-in Maximum Power Point Tracking (MPPT) solar regulator allows The Manager30 to deliver the maximum amount of power from portable solar panels, even during low light conditions.   Remote monitor Designed to show you auxiliary battery information and charge status. You can customise how your battery is charged and monitor where the charge is coming from. A user-friendly, graphical display monitor lets you know what’s going on, keeping you in control at all times.   Features Multi Stage AC-DC Battery Charger Multi Stage DC to DC Charger Maximum Power Point Tracking Solar Regulator Battery Monitor Dual Battery Isolator Load Disconnect Controller Super quiet operation Charges AGM, Gel, Calcium content, VRLA, Standard Lead Acid and LiFePO4 batteries Tested to mains power safety standards in Australia   Charging lithium batteries Lithium batteries have improved storage capacity relative to size and weight. They do however require specific charging conditions in order to operate correctly and the battery itself must have an in-built cell management system. REDARC have designed a charging profile within The Manager30 to complement these in-built systems.   Green power priority The Manager30 is designed to charge an auxiliary battery from multiple sources simultaneously. If 12 volt solar power is available, solar power will be used before topping up the output charging current from another source mains (if available) or DC vehicle power when on the move.   MPPT solar regulator The built-in Maximum Power Point Tracking (MPPT) solar regulator allows The Manager30 to deliver the maximum amount of power from portable solar panels, even during low light conditions.   Remote monitor Designed to show you auxiliary battery information and charge status. You can customise how your battery is charged and monitor where the charge is coming from. A user-friendly, graphical display monitor lets you know what’s going on, keeping you in control at all times.   Multi Stage AC-DC Battery Charger Multi Stage DC to DC Charger Maximum Power Point Tracking Solar Regulator Battery Monitor Dual Battery Isolator Load Disconnect Controller Super quiet operation Charges AGM, Gel, Calcium content, VRLA, Standard Lead Acid and LiFePO4 batteries Tested to mains power safety standards in Australia   SPECIFICATIONS   Output System Voltage 12VDC Maximum Charging Voltage 16.0V* (*Calcium setting in storage mode) Output Current Rating (Cont.) 30A Output Power 520W Input Fuse Rating 40A Output Fuse Rating 40A Warranty 2 Years Protection Short Circuit, Surge, Reverse Polarity, Overload Input (Operating) Voltage 240VAC / 9 - 32VDC Length (mm) 445 Width (mm) 185 Height (mm) 79 Weight (kg) 5.5 AC Mains Plug Type AU, NZ, EU Type Approval CE   VIDEOS

REDARC The Manager30 with RedVision display - Micks Gone Bush
REDARC The Manager30 with RedVision display $2,457.00

Overview     BMS1230S3R Manual The Manager30 BMS1230S3R features both the RedVision display screen and mobile phone connectivity for complete battery management for charging auxiliary batteries used in recreational automotive and marine applications. The dual battery system incorporates AC, DC and solar inputs to achieve the best charge for an auxiliary battery. This 30amp charger is the complete battery management system that gives you the best of both worlds. Whether you’re free camping or on a powered site, it knows how to take charge and keep auxiliary batteries fully charged. The Manager30 operates like 6 separate products, it charges an auxiliary battery from the vehicle while on the move, it’s a 240-volt charger, a solar regulator, a battery isolator, a load disconnect controller, all with a remote coloured RedVision battery monitor, making it market-leading. The RedVision remote battery monitor is designed to show auxiliary battery information and charge status through its coloured display. You can customise how your battery is charged and monitor where it is coming from. It also provides full connectivity to the Manager30 via the RedVision Smartphone App on both Apple and Android devices. Whether you’re charging Lead Acid, Gel, Calcium, AGM or Lithium Iron Phosphate batteries, The Manager30 represents a complete DC to DC charging and maintenance solution. If you’re charging one auxiliary battery or more, The Manager30 will ensure they’re always fully charged, providing peace of mind when battery charge provides the power source for the comforts of home whilst travelling around Australia. Developed with ease of installation in mind, The Manager30 is compatible with all vehicles and alternator systems including variable voltage alternators.   RedVision monitor The Manager30 comes with a display designed to give you house battery information and charge status along with critical system information while charging is in progress. With the display, you can customise how your house battery is charged and monitor where the charge is coming from, keeping you in control at all times. The display can be surface mounted on a wall or recessed (into the dashboard of an RV for example). The display also allows a Bluetooth connection to your Smartphone, via the RedVision App, which provides the same data and control available on the display all in the palm of your hand.   Charging lithium batteries Lithium batteries (LiFeP04) have improved storage capacity relative to size and weight. They do however require specific charging conditions in order to operate correctly and the battery itself must have an in-built cell management system. REDARC have designed a charging profile within The Manager30 to complement these in-built systems.   Green power priority The Manager30 is designed to charge an auxiliary battery from multiple sources simultaneously. If 12-volt solar power is available, solar power will be used before topping up the output charging current from another source mains (if available) or DC vehicle power when on the move.   MPPT solar regulator The built-in Maximum Power Point Tracking (MPPT) solar regulator allows The Manager30 to deliver the maximum amount of power from portable solar panels, even during low light conditions.   Features          Multi-Stage AC-DC Battery Charger          Multi-Stage DC to DC Charger          Maximum Power Point Tracking Solar Regulator          Improved, 4.3” coloured RedVision display battery monitor          RedVision display allows connection to Smartphone via App          Dual Battery Isolator          Load Disconnect Controller          Super quiet operation          Charges AGM, Gel, Calcium content, VRLA, Standard Lead Acid and LiFePO4 batteries          Tested to mains power safety standards in Australia Specifications Output System Voltage 12VDC Maximum Charging Voltage 16.0V* (*Calcium setting in storage mode) Output Current Rating (Cont.) 30A Output Power 520W Input Fuse Rating 50A Output Fuse Rating 40A Protection Short Circuit, Surge, Reverse Polarity, Overload Input (Operating) Voltage 220-240VAC / 9 - 32VDC Length (mm) 445 Width (mm) 185 Weight (kg) 5.5 AC Mains Plug Type AU, NZ, EU Type Approval CE Warranty 2 Years

Sold out
REDARC 4A SmartCharge AC Battery Charger - Micks Gone Bush
REDARC 4A SmartCharge AC Battery Charger $143.00

Overview     REDARC SmartCharge Instruction Manual REDARC’s 4 amp SmartCharge by DEFA is a portable AC to DC battery charger that has been designed to automatically charge and maintain most common 12V automotive batteries. The 4A SmartCharge automatically recognises the type of battery it’s connected to, then calculates charging and its status and determines what charging is needed. An in-built display shows the status of charge and battery charge level.   Shockproof and rugged Award-winning for its design and user friendliness, it is also rated to IP65 meaning it can be used in damp and outdoor environments. It is shockproof, sparkproof and protected against reverse polarity. With a practical integrated cable storage solution, users can fasten the clamps to the unit when they are not in use which means you no longer have to store the cables in a pile. The 4A SmartCharge is best suited for use on batteries rated from 4 to 120Ah (Amp hours).   Features     Simple one-button solution and user-friendly display interface     Adapts automatically to your battery     Battery status monitoring in the display     Secured against short circuits and reverse polarity     Integrated cable storage solution     Temperature-compensated charging cycle Specifications Output Current (Max) 4A Battery Size 12V/2-110Ah Input 230V AC 50-60Hz Power Consumption 60W Inverse Current < 1 mA Output Voltage 14.4/14.7V Weight 735g Dimensions 210x90x54mm Warranty 5 Years Videos

Sold out
REDARC 8A SmartCharge AC Battery Charger - Micks Gone Bush
REDARC 8A SmartCharge AC Battery Charger $247.00

Overview     REDARC SmartCharge Instruction Manual The 8 amp SmartCharge by DEFA is an AC to DC portable battery charger that has been designed to automatically charge and maintain most common 12V automotive batteries. Suitable for larger batteries from 20 to 200Ah, these portable car chargers will charge 12v batteries with voltage as low as 2v and once connected, automatically recognise the type of battery and tailor a smart charge to suit exactly what the battery requires.   Best portable power supply for any need Featuring a temperature compensated charging process that adjusts charging levels dependent on the weather outside, ensures a fast and efficient charging solution in both summer and winter. These intelligent battery chargers are shockproof, sparkproof, protected against reverse polarity and are the ideal solution when you want to know how to charge your car battery easily and safely.   Features     Simple one-button solution and user-friendly display interface     Adapts automatically to your battery     Battery status monitoring in the display     Secured against short circuits and reverse polarity     Integrated cable storage solution     Temperature compensated charging cycle Specifications Output Current (Max) 8A Battery Size 12V/20-200Ah Input 230V AC 50-60Hz Power Consumption 132W Inverse Current < 1 mA Output Voltage 14.4/14.7V Weight 750g Dimensions 235x90x54mm IP Class IP65 Warranty 5 Years Videos

REDARC 10A SmartCharge AC Battery Charger - Micks Gone Bush
REDARC 10A SmartCharge AC Battery Charger $287.00

Overview The 10 amp SmartCharge by DEFA is an AC to DC portable battery charger that has been designed to automatically charge and maintain most common 12V automotive batteries. Designed for larger batteries anywhere from 20 to 200Ah, these portable car chargers automatically adjust to suit the battery type in any caravan, car or boat application and tailor a charging solution to suit its needs.   Easy to use automatic battery charger Looking for an intelligent AC to DC battery charger? The SmartCharge range from DEFA are so simple to use all you have to do is connect the charging clips to the battery, connect to a power outlet and push the ON button. When finished, you simply wind up the cables in the cable tracks on the charger and you are ready for the next time you need it.   Features     Simple one-button solution and user-friendly display interface     Adapts automatically to your battery     Battery status monitoring in the display     Secured against short circuits and reverse polarity     Integrated cable storage solution     Temperature compensated charging cycle Specifications Output Current (Max) 10A Battery Size 12V/30-250Ah Input 230V AC 50-60Hz Power Consumption 175W Inverse Current < 1 mA Output Voltage 14.4/14.7V Weight 750g Dimensions 235x90x54mm IP Class IP65 Warranty 5 Years Videos

Sold out
REDARC 30A Showroom Charger - Micks Gone Bush
REDARC 30A Showroom Charger $944.00

Overview     REDARC Showroom Charger Instruction Manual The 30 amp Showroom Charger by DEFA is an AC to DC portable battery charger that has been designed to automatically charge and maintain 12V automotive batteries. The Showroom Charger is designed for long-term battery maintenance charging, providing fast battery charge when you need. It is ideal for use in vehicle showrooms, or at home connected to infrequently used vehicles, caravans, boats and RV's. It has been designed to charge Lead Acid, AGM, EFB and GEL batteries up to approximately 250Ah and can maintain battery charge continuously. The Showroom Charger is based on modern switch-mode technology and galvanic isolation.   Easy to use battery maintenance charger Looking for an intelligent AC to DC battery charger? The Showroom Charger by DEFA is so simple to use all you have to do is connect the charging clips to the battery, connect to a power outlet and push the ON button.   Features Includes charger and cables          Simple one-button solution and user-friendly display interface Battery status monitoring in the display Optimal 7-step charging profile Secured against short circuits and reverse polarity Discreet black anodised aluminium design Specifications AC Input 220-240V~ 50-60Hz 560W DC Output Range 2.0-14.4V Maximum Output Current 32.0A at 14.4V Battery Types Supported 12V Lead Acid including AGM, EFB and Gel Operating Temperature -20°C to +40°C Cooling Convection Weight (Without Cable) 1.7kg Dimensions 227 x 125 x 62mm IP Class IP40 Warranty 2 Years

REDARC 160 Watt Monocrystalline Portable Folding Solar - Micks Gone Bush
REDARC 160 Watt Monocrystalline Portable Folding Solar $637.00

OVERVIEW     Monocrystalline Folding Solar Panels Manual The Monocrystalline Portable Folding Solar Panel, available in 160 watt rating, features ‘A’ grade highly efficient German SolarWorld® Monocrystalline cells. The panels lightweight design includes adjustable legs which allows the panels to be angled towards the sun and be conveniently moved as required.The panel itself features reinforced aluminium legs, quality stainless steel hinges and latches and a fold-away handle.Included is a 5m Anderson™ to Anderson™ cable, so the panel can be set-up in full sun and you can still set-up camp in a shady area.With genuine industry standard Anderson™ SB™50 connectors, installation has never been easier or faster.REDARC recommends the purchase of an REDARC Solar Regulator. This is essential to ensure that the correct charge is supplied safely and efficiently and will protect batteries from overcharging. Minimum 20A Solar Regulator required for the 160 watt Folding Solar Panel. Features Highly efficient Monocrystalline Portable Folding Solar Panel Adjustable, lightweight leg design Genuine industry standard Anderson™SB™50 plug connection Fast, easy installation 5m Anderson™ to Anderson™ cable included   SPECIFICATIONS Output Power 160W Maximum Power Voltage 17.8V Maximum Power Current 9.0A Open Circuit Voltage 22.3V Short Circuit Current 9.7A Height (mm) 505 Width (mm) 1005 Weight (kg) 16 Warranty 2 Years   VIDEOS  

REDARC 190 watt Solar Blanket SunPower Cells - Micks Gone Bush
REDARC 190 watt Solar Blanket SunPower Cells $2,108.00

OVERVIEW     SAF & SSF Instruction Manual REDARC’s 190W Solar Blanket SunPower® Cells has been designed for portability and strength and feature no grid lines, a solid copper backing and thick connectors for higher efficiency. The unique design of Sunpower® cells reduces cell failure from corrosion and breakage.Using an anti-reflective scratch-resistant ETFE coating, the 190W SunPower® blanket features a high melting temperature, is UV resistant and has chemical and self-cleaning non-stick resistance properties, making this blanket highly reliable and efficient.Designed to charge 12V Automotive, Marine and Recreational Vehicle battery systems, the 190W SunPower® blanket will provide extra battery charge to power 12 volt equipment. This portable solar panel is compact and lightweight, making it easy to store and is about a third of the weight of an equivalent glass solar kit.   SPECIFICATIONS Output Power 191.4W Maximum Power Voltage 16.5 Maximum Power Current 11.6A Open Circuit Voltage 20.0V Short Circuit Current 12.3A Length (mm) 1720 Width (mm) 930 Weight (kg) 7.2 Warranty 2 Years     VIDEOS  

REDARC 150 watt Solar Blanket SunPower - Micks Gone Bush
REDARC 150 watt Solar Blanket SunPower $1,681.00

OVERVIEW REDARC’s 150W Solar Blanket SunPower Cells® has been designed for portability and strength and feature no grid lines, a solid copper backing and thick connectors for higher efficiency. The unique design of SunPower® cells reduces cell failure from corrosion and breakage.Using an anti-reflective scratch-resistant ETFE coating, the 150W SunPower® portable solar blanket features a high melting temperature, is UV resistant and has chemical and self-cleaning non-stick resistance properties, making this blanket highly reliable and efficient.Designed to charge Automotive, Marine and Recreational Vehicle battery systems, the 150W SunPower® blanket will provide extra battery charge to power 12 volt equipment. It is compact and lightweight, making it highly portable, easy to store and is about a third of the weight as an equivalent power glass folding panel.   SPECIFICATIONS   Output Power 153.1W Maximum Power Voltage 17.6 Maximum Power Current 8.7A Open Circuit Voltage 21.1V Short Circuit Current 9.3A Length (mm) 1405 Width (mm) 930 Weight (kg) 6 Warranty 2 Years   VIDEOS

Sold out
112 watt REDARC Solar Blanket Amorphous Cells - Micks Gone Bush
112 watt REDARC Solar Blanket Amorphous Cells $2,449.00

OVERVIEW     SAF_SSF Instruction Manual The Solar Blanket Amorphous Cells is available as a 112 watt portable solar blanket. Using the latest in Solar technology it offers superior flexibility in a light weight, conveniently sized package. Its flexible design reduces the risk of cell breakage and cracks and is known to perform better in shade compared to crystalline panels making it the most flexible portable solar panel in the market. SPECIFICATIONS   Output Power 112W Maximum Power Voltage 18V Maximum Power Current 6.3A Open Circuit Voltage 24.0V Short Circuit Current 7.6A Length (mm) 1860 Width (mm) 1185 Weight (kg) 4.8 Warranty 2 Years     VIDEOS

REDARC 150W Monocrystalline Solar Panel - Slim Line - Micks Gone Bush
REDARC 150W Monocrystalline Solar Panel - Slim Line $515.00

OVERVIEW     Monocrystalline Solar Panels Manual REDARC standard monocrystalline flat panels are highly efficient with a robust design. A tempered glass coating and a sturdy aluminium frame ensure that our panels will withstand harsh road conditions and extreme weather conditions.Each panel is tested at time of manufacture to conform to CE standards, so you can be sure that the panel output is exactly as described in its specification. Monocrystalline construction Strong Aluminium Frame Tempered glass coating Diode protected 5 year structural warranty 25yr/80% efficiency warranty   SPECIFICATIONS   Output Power 150W Length (mm) 1480 Width (mm) 670 Warranty 2 Years Supplied Cable 0.8m Short Circuit Current 9.0A Open Circuit Voltage 22.2V Weight (kg) 12 Height (mm) 35 Output System Voltage 12VDC Construction Monocrystalline Maximum Power Voltage 18.4V   VIDEOS    

16