Sold out
Redarc Single Temperature 52mm Gauge with optional current display - Micks Gone Bush
Redarc Single Temperature 52mm Gauge with optional current display $228.00

Overview Single Temperature 52MM Gauge   The REDARC 52mm single temperature gauge is ideal for monitoring your engines oil or water (coolant) temperature. The G52-TA gauge is supplied with one REDARC 1/4 NPT thread temperature sender that measure from -30 to +160°C. Oil subjected to excessive temperatures can lose its lubrication properties that keep metal parts from touching. If the oil temperature rises above the desired limit, you can reduce the load placed on the engine or transmission to reduce the temperature and prevent engine failure. Similarly, monitoring the water (coolant) temperature of your engine ensures that it does not over heat, resulting in major engine damage.   Current Display*  The G52-TA gauge is also equipped with an optional 100A rated current display that monitors the amount of current to or from a battery. This device can be fitted around the earth connection of either the main or auxiliary battery. You will need to purchase the REDARC Hall effect current sensor (GS-AMPS) to equip the gauge with this function. The G52-TA gauge diameter requires a 52mm hole for mounting. REDARC offer a range of mounting solutions including a 2” black plastic mounting cup (GH-CUP) and one (GH-MP1), two (GH-MP2) and three (GH-MP3) hole gauge mounting panels. Radio inserts are also available for the Toyota Hilux (GH-RI05). The REDARC 24 to the 12-volt adaptor (GA-2412V) can be used to connect this gauge to a vehicle with a 24-volt ignition and lighting supply, however only a 12-volt battery can be monitored.   Features Satin Chrome Bezel 13 Selectable Backlight Colours Multiple programmable alert levels with amber or red backlight and audible beep Display illuminates when park lights are turned on so you can check battery voltages and discharge or charge current without turning on the ignition. If fitting more than one REDARC gauge, a communications link can be connected between the gauges to change the backlight colour of all at once. Specifications Warranty 2 Years Sensor(s) (Included) GS-OWT1-4 Sensor (Optional) GS-AMPS Standby Current Draw 30mA Input (Operating) Voltage 6 - 16V Height (mm) 42 Weight (kg) 0.05 Videos

Sold out
Redarc Dual Temperature 52mm Gauge with optional temperature display - Micks Gone Bush
Redarc Dual Temperature 52mm Gauge with optional temperature display $273.00

Overview Dual Temperature 52MM Gauge The REDARC 52mm dual temperature gauge is ideal for monitoring your engines oil and water (coolant) temperature. The G52-TTT gauge is supplied with two REDARC 1/4 NPT thread temperature senders that measure from 60 to 150°C. Oil subjected to excessive temperatures can lose its lubrication properties that keep metal parts from touching. If the oil temperature rises above a desired limit, you can reduce the load placed on the engine or transmission to reduce the temperature and prevent engine failure. Similarly, monitoring the water (coolant) temperature of your engine ensures that it does not overheat, resulting in major engine damage.   Temperature Sensor* The G52-TTT gauge also supports one of four optional temperature sensors. You will need to purchase one of the following REDARC temperature sensors to equip the gauge with this function: GS-UT-80: An NTC temperature sensor in a plastic housing for measuring cabin, fridge or outside temperature. Range is -20~+80°C. This sensor is supplied with a 6 metre extension cable. GS-UT-120: An NTC temperature sensor in a metal copper housing with 6mm diameter mounting hole. Range is -20~+120°C. This sensor is supplied with a 6 metre extension cable. GS-OWT1-4: Water or Oil temperature sender. 1/4 NPT threaded. Designed to measure from -20~ +170°C. Supplied with 3 metre extension cable. GS-OWT1-8: Water or Oil temperature sender. 1/8 NPT threaded. Designed to measure from -20~ +170°C. Supplied with 3 metre extension cable. The G52-TTT gauge diameter requires a 52mm hole for mounting. REDARC offer a range of mounting solutions including a 2” black plastic mounting cup (GH-CUP) and one (GH-MP1), two (GH-MP2) and three (GH-MP3) hole gauge mounting panels. Radio inserts are also available for the Toyota Hilux (GH-RI05). The REDARC 24 to 12 volt adaptor (GA-2412V) can be used to connect this gauge to a vehicle with a 24 volt ignition and lighting supply, however only a 12 volt battery can be monitored.   Features Satin Chrome Bezel 13 Selectable Backlight Colours Multiple programmable alert levels with amber or red backlight and audible beep Display illuminates when park lights are turned on so you can check battery voltages and discharge or charge current without turning on the ignition. If fitting more than one REDARC gauge, a communications link can be connected between the gauges to change the backlight colour of all at once. Specifications Warranty 2 Years Sensor(s) (Included) GS-OWT1-4, GS-OWT1-4 Sensor (Optional) GS-UT-80 / GS-UT-120 / GS-OWT1-4 / GS-OWT1-8 Standby Current Draw 30mA Input (Operating) Voltage 6 - 16V Height (mm) 42 Weight (kg) 0.05 Videos

2